Decorative Products

Our extensive range of finishes is second to none.

Dull or Satin Finishes

We can provide standard cosmetic finishes or produce material to a measured and certified finish in either Ra, Rz or to 'N' nuclear standards.

Ask our Sales Team about developing a finish that will meet your exact needs and which, through our unique profiling system, guarantees continuity sheet to sheet, batch to batch.

A Dull Polish [ 240 grit ] or a Satin Finish [ 320 grit ] are just two of the many commercial finishes we can apply on any product in any material. If you need a coarser finish such as an 80 grit or a finer finish such as a 400 grit then speak to our Sales Team who will be happy to advise you.

Not sure which finish you need? Our experienced staff will be able to advise you on which finish will be the best and most cost effective for your product. They can also help you if you have a specific reference or a measurement for a finish.

Silicon? If you require a Silicon Carbide finish then we are happy to provide this as an alternative to Aluminium Oxide.

Bright or Mirror Finishes

On sheet we are happy to offer a Bright/Mirror polish which includes our Speciality Finish 'UltraBright'. All reflective finishes can be measured in either Ra or Gloss units and certified.

Protection: All products are appropriately protected after polishing.

Circle Polished Finishes

On sheet we offer decorative patterned finishes, often referred to as 'engine turned'. The standard ST50 is an overlapping 50mm dia circle - popular in the catering industry.

For something a little bit more unique we offer ST75 which is a fan affect pattern, an eye-catching pattern that is perfect for architectural applications. Why not have these finishes applied to copper or brass as well as stainless steel?

Prolustre

A super satin finish produced especially for those industries such as Pharmaceutical or Catering, which need a surface finish of less than 0.5 Ra to comply with BS EN 10088-2 2K finish. Prolustre has an average surface finish of 0.25 Ra, and this finish, developed especially by PPS, has an attractive surface lustre fulfilling aesthetic requirements as well as technical surface measurements.

Prolustre is available on standard sheet 2m x 1m > 3m x 1.5m.

SatinWeb

A smooth scotchbrite-type finish particularly popular on the Continent and now fast developing a following in the UK. With minimum surface stock removal with this finish good quality base material is a must. The smooth 'brushed' affect of SatinWeb can be produced on both sheet and coil giving our clients the choice to pick the most cost effective material choice for production.

SatinWeb is available on sheet 2m x 1m > 3m x 1.25mm, and coil 100mm > 500mm.

Problend

Problend is our in-house duplex finish which combines the cut of an abrasive finish with the 'brush' of SatinWeb and is suitable for many applications where that little bit extra is needed in a project.

Problend is available on standard sheet up 2m x 1m > 3m x 1.25m.

ProCirc

A variety of engine turned finishes giving a choice of patterns on stainless steel and aluminium from 1000mm wide to 2000mm wide. Standard circle and semi circle finishes are ideal for applications such as road tankers, vessels, tanks, bar furniture, catering equipment - in fact any application where a decorative finish is required. ProCirc will not only present an aesthetically pleasing initial appearance but will retain it's good looks after many years in service. We are also happy to discuss special finishes or size requirements.